fabric-join
This command is used to join an existing fabric on the switch.
Syntax fabric-join
|
Specify one of the following options: |
|
|
name name-string |
Specify the name of the fabric. |
|
password password-string |
Specify the fabric password if configured. |
|
switch-ip ip-address |
Specify the IP address of the switch joining the fabric. |
|
Specify any of the following options: |
|
|
vlan vlan-id |
Specify VLAN for the fabric. |
|
delete-conflicts| abort-on-conflict |
Specify the action to take when there is a conflict with another fabric. |
|
location-id location-id-number |
Specify the location ID to use for joining the fabric. |
|
repeer-to-cluster-node cluster-repeer-node name |
Replace a dead cluster node by restoring against the existing cluster node. |
Defaults None.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.2 |
The parameter, vlan, added. |
|
Version 2.3 |
The parameter, repeer-to-cluster-node, added. |
|
Version 3.0.0 |
The parameter, repeer-to-cluster-node, deprecated. The parameter location-id added. |
|
Version 5.1.1 |
The parameter, repeer-to-cluster-node, re-added. |
Usage The fabric consists of one or more switches that share an administrative domain. The fabric presents the abstraction of a big logical switch with a single point of management, hiding the complexity of the underlying collection of switch hardware and inter-switch links. Use this command to join a fabric.
Examples To join the fabric, network-1, with the id, admin, and the password, pizzatime, use the following command:
CLI network-admin@switch > fabric-join name network-1 id admin password pizzatime