fabric-node-location-mappings
Netvisor uses this command to generate location mappings for importing switch configurations.
Syntax fabric-node-location-mappings
|
id id-number |
Displays the ID assigned to the node. |
|
location-id location-id-number |
Displays the location ID assigned to the fabric. |
|
serial serial-string |
Displays the serial number. |
|
name fabric-node name |
Displays the node name. |
|
fab-name fab-name-string |
Displays the fabric name. |
|
fab-id |
Displays the ID assigned to the fabric. |
|
cluster-id |
Displays the ID assigned to the cluster. |
|
local-mac mac-address |
Displays the local MAC address. |
|
fabric-network in-band|mgmt |
Displays the network fabric. |
|
control-network in-band|mgmt |
Displays the control plane network. |
|
mgmt-ip ip-address |
Displays the management IP address. |
|
mgmt-netmask netmask |
Displays the management netmask. |
|
mgmt-ip2 ip-address |
Displays the second management IP address. |
|
mgmt-netmask2 netmask |
Displays the second management netmask |
|
mgmt-assignment2 none|dhcp|dhcpv6 |
Displays the type of IP address assignment. |
|
mgmt-linklocal ip-address |
Displays the IPv6 address of the link local. |
|
mgmt-assignment-linklocal none|dhcp|dhcpv6 |
Displays the type of IP address assignment. |
|
mgmt-mac mac-address |
Displays the interface MAC address. |
|
mgmt-vnet vnet name |
Displays the interface VLAN VNET. |
|
mgmt-public-vlan vlan-id |
Displays the public VLAN ID. |
|
mgmt-secondary-macs secondary-macs-string |
Displays the secondary MAC addresses. |
|
mgmt-if-nat-realm internal|external |
Displays the NAT interface realm. |
|
vmgmt-ip ip-address |
Displays the IP address. |
|
vmgmt-netmask netmask |
Displays the netmask. |
|
vmgmt-ip2 ip-address |
Displays the second IP address. |
|
vmgmt-netmask2 netmask |
Displays the netmask. |
|
vmgmt-assignment2 none|dhcp|dhcpv6 |
Displays the type of lPv6 address assignment. |
|
vmgmt-linklocal ip-address |
Displays the IPv6 linklocal address. |
|
vmgmt-assignment-linklocal none|dhcp|dhcpv6 |
Displays the type of IPv6 address assignment. |
|
vmgmt-mac mac-address |
Displays the MAC address. |
|
vmgmt-vnet vnet name |
Displays the VNET name. |
|
vmgmt-vlan vlan-id |
Displays the VLAN ID. |
|
vmgmt-public-vlan vlan-id |
Displays the public VLAN ID. |
|
vmgmt-secondary-macs secondary-macs-string |
Displays the secondary MAC addresses. |
|
in-band-ip ip-address |
Displays the IP address. |
|
in-band-netmask netmask |
Displays the netmask. |
|
in-band-ip2 ip-address |
Displays the second IP address. |
|
in-band-netmask2 netmask |
Displays the netmask. |
|
in-band-assignment2 none|dhcp|dhcpv6 |
Displays the type of lPv6 address assignment. |
|
in-band-linklocal ip-address |
Displays the IPv6 linklocal address. |
|
in-band-assignment-linklocal none|dhcp|dhcpv6 |
Displays the type of IPv6 address assignment. |
|
in-band-mac mac-address |
Displays the MAC address. |
|
in-band-vnet vnet name |
Displays the VNET name. |
|
in-band-bd bridge-domain name |
Displays the interface bridge domain. |
|
in-band-vlan vlan-id |
Displays the VLAN ID. |
|
in-band-vlan-type public|private |
Displays the type of VLAN. |
|
in-band-public-vlan vlan-id |
Displays the public VLAN ID. |
|
in-band-secondary-macs secondary-macs-string |
Displays the secondary MAC addresses. |
|
in-band-if-nat-realm internal|external |
Displays the interface NAT realm. |
|
fab-tid fab-tid-number |
Displays the fabric transaction ID. |
|
cluster-tid cluster-tid-number |
Displays the cluster transaction ID. |
|
out-port out-port-number |
Displays the fabric outgoing port. |
|
version version-string |
Displays the Netvisor version. |
|
state offline|online|in-band-only-online|vmgmt-only-online|mgmt-only-online|fabric-joined|eula-required|setup-required|fabric-required|fresh-install |
Displays the fabric state. |
|
firmware-upgrade |
Displays the firmware upgrade status. |
|
device-state |
Displays the device state. |
|
ports ports-number |
Displays the ports. |
|
keepalive-timeout high resolution time: #ns |
Displays the keepalive timeout in nanoseconds. |
Access Network Administrator
History Command introduced in Version 3.1.0.
Usage Use this command to generate location mappings for a node.
Examples To generate location mappings for a node, use the following syntax:
CLI network-admin@switch > fabric-node-locations- mapping