fabric-upgrade-start
This command is used to start a fabric-wide upgrade.
Syntax fabric-upgrade-start packages sftp-files name [auto-finish|no-auto-finish]prepare|no-prepare reboot-parallel|reboot-single reboot-group number
|
packages sftp-files name |
Specify a comma delimited list of the offline packages to use for the upgrade process. |
|
auto-finish|no-auto-finish |
Specify if you want to automatically reboot the fabric after the upgrade. |
|
abort-on-failure| |
Specify if you want to stop the upgrade process if the upgrade fails on a node. |
|
manual-reboot| |
Specify if you want to manually reboot the switches so that all switches do not reboot at the same time. |
|
download-count 1..5 |
Specify the number of concurrent downloads, the default count is 5. |
|
prepare|no-prepare |
Specify if you want to perform setup steps for the actual upgrade. |
|
upload-server upload-server-string |
Specify the upload server string. |
|
server-password server-password-string |
Specify the server password. |
Defaults None.
Access CLI
History
|
Version 2.2.6 |
Command introduced. |
|
Version 2.3 |
The parameters prepare, reboot-parallel, and reboot-group added. |
|
Version 3.1.0 |
The parameters, upload-server, and server-password, added. |
|
Version 5.1.1 |
The parameters, rolling|no-rolling, reboot-parallel|reboot-single, reboot-count got deprecated. |
|
Version 6.1.0 |
The parameter, download-count is added. |
Usage The fabric consists of one or more switches that share an administrative domain. The fabric presents the abstraction of a big logical switch with a single point of management, hiding the complexity of the underlying collection of switch hardware and inter-switch links. Use this command to begin a fabric-wide upgrade.
Examples To force the upgrade to end immediately, use the following syntax:
CLI network-admin@switch > fabric-upgrade-start