fabric-vnic-modify
Netvisor allows the creation of a management interface on a Virtual Network Interface Card (vNIC) for fabric communication. In the current fabric, Netvisor allows two subnets: one for out-of-band provisioning and fabric, and one for in-band fabric. This feature allows three subnets per fabric:
- An out-of-band provisioning subnet
- An out-of-band fabric subnet
- An in-band fabric subnet
Each subnets uses a separate VLAN for traffic isolation purposes. When a vNIC is created for the management interface, fabric communication automatically switches to this vNIC, without additional configuration.
Syntax fabric-vnic-modify
|
ip ip-address |
Specify the IP address of the vNIC. |
|
netmask netmask |
Specify the netmask for the IP address. |
|
vlan vlan-id |
Specify the VLAN ID for the vNIC. This must be unique to the vNIC. |
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to modify a vNIC for fabric management.
Examples To modify a vNIC with IP address, 20.1.1.1/24 on VLAN 32, use the following syntax:
CLI network-admin@switch > fabric-vnic-modify ip 20.1.1.1 netmask 255.255.255.0 vlan 32