flow-table-show
This command is used to display information about traffic flows on the switch.
Syntax flow-table-show
|
name name-string |
Specifies the name of the traffic flow |
|
id id-number |
Specifies the identifier of the traffic flow |
|
hw-id hw-id-number |
Specifies the identifier of the hardware source |
|
flow-name flow-name-string |
Specifies the name of the traffic flow type |
|
flow-hw-id flow-hw-id-number |
Specifies the identifier of the hardware flow source |
Defaults None
History
|
Version 1.2 |
Command introduced. |
|
Version 2.0 |
The parameter, flow-id flow-id, deprecated. |
|
Version 5.1.1 |
The parameter, tbl-id, deprecated. |
Usage Each switch is built with a datapath ASIC inside and contains a set of hardware flow tables for traffic forwarding. Use this command to display flows as they are currently programmed in each of the hardware flow tables.
Examples To display the flows, use the following command:
CLI network-admin@switch > flow-table-show layout vertical
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: Martian-L2-Check
flow-id: 2
flow-hw-id: 1048578
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: Martian-IP4-L3-Check
flow-id: 3
flow-hw-id: 1048579
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: Martian-IP6-L3-Check
flow-id: 4
flow-hw-id: 1048580
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: STP-FLOW
flow-id: 5
flow-hw-id: 3145733
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: PVST-FLOW
flow-id: 6
flow-hw-id: 1048582
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: LLDP-NB-Flow
flow-id: 7
flow-hw-id: 1048583
switch: pleaides24
name: Switch System Table - L2 to L4
id: 2
hw-id: 33
flow-name: LLDP-NONTPMR-Flow
flow-id: 8
flow-hw-id: 1048584
flow-hw-id: 1048585