l2-check-show

Glossary		Print Page		Document Feedback		Support & Services		Pluribus Networks		Pluribus Blog		LinkedIn		Facebook		Twitter

l2-check-show

It is possible for Layer 2 entries to go out of sync between what is present in the hardware and in software. This command displays the status of Layer 2 entries.

Syntax l2-check-show

mac mac-address	The virtual router ID from 0 to 15.
vnet vnet-name	The IP address of the entry.
bd bridge-domain-name	The bridge domain.
vlan vlan-id	The VLAN ID.
public-vlan vlan-id	The public VLAN assigned to the vPort.
vxlan vxlan-id	Specify if you want to check and fix out of sync VXLANs IDs of vPorts.
sw-port port-number	The software port.
sw-state active\|static\|vrrp\|tunnel\|software\|needs-peer-status\|port-mac\|hit\|ageout-check\|moving\|loop-probe\|local-tunnel\|igmp-mac\|user-flush\|vxlan-loopback\|router\|update-peer-only\|active-state-mismatch\|peer-port-missing\|peer-port-not-vlag\| peer-port-not-orphaned\|peer-port-not-cluster-link\|sw-active\|hsrp\|invalid-vlan\|owner-lost\|cluster-link-down\|vxlan-router\|peer-force-resync\|excess-mac-move-detected\|excess-ip-move-detected\|retry\|evpn\|evpn-wo-bgp\|evpn-def-gw\|evpn-delete	The software state to check.
hw-port port-number	The hardware port number.
tunnel-name tunnel-name-string	The tunnel name.
hw-state active\|static\|vrrp\|tunnel\|software\|needs-peer-status\|port-mac\|hit\|ageout-check\|moving\|loop-probe\|local-tunnel\|igmp-mac\|user-flush\|vxlan-loopback\|router\|update-peer-only\|active-state-mismatch\|peer-port-missing\|peer-port-not-vlag\| peer-port-not-orphaned\|peer-port-not-cluster-link\|sw-active\|hsrp\|invalid-vlan\|owner-lost\|cluster-link-down\|vxlan-router\|peer-force-resync\|excess-mac-move-detected\|excess-ip-move-detected\|retry\|evpn\|evpn-wo-bgp\|evpn-def-gw\|evpn-delete	The hardware state to check and fix.
fix-action none\|add-to-hardware\|removefrom-hardware\|fix-port-in-hardware\|fix-tunnel-in-hardware\|FAILED-add-to-hardware\|FAILED-remove-from-hardware\|FAILED-fix-port-in-hardware\|FAILED-fix-tunnel-in-hardware\|delete-port-mac\|mark-port-mac	The action used to fix the entry.

Defaults None.

Access CLI

History

Version 2.4	Command introduced.
Version 2.4.1	The option, igmp-mac, user-flush, vxlan-loopback, router added to parameters sw-state and hw-state. The options, delete-port-mac and mark-port-mac added to the parameter fix-action. The parameter, public-vlan, added.
Version 2.6.2	Additional parameters added to sw-state and hw-state.
Version 3.0.0	The parameter, l2-net, added.
Version 5.1.1	The options, invalid-vlan\|owner-lost\|cluster-link-down\|vxlan-router, added to the parameters, sw-state, and hw-state.

Usage Use this command to display Layer 2 table entries.

Examples To display the Layer 2 entries and states, use the following command:

CLI network-admin@switch > l2-check-show vlan 25