l2-static-multicast-group-create
This command is used to create a Layer 2 static multicast group. Hosts join multicast groups either by sending an unsolicited IGMP join message or by sending an IGMP join message in response to a general query from a multicast router (the switch forwards general queries from multicast routers to all ports in a VLAN). When you specify group membership for a multicast group address statically, the static setting supersedes any IGMP snooping learning. Multicast group membership lists can consist of both static and IGMP snooping-learned settings.
Syntax l2-static-multicast-group-create
|
group-mac mac-address |
Specify a MAC address for the multicast group. |
|
vlan vlan-id |
Specify a VLAN ID for the multicast group. |
|
ports port-list |
Specify a list of ports for the multicast group. |
Defaults None
Access network-admin
History Command introduced in Version 2.3.
Usage Use this command to create a Layer 2 static multicast group.
Examples To create a L2 static multicast group on MAC address, 0050.3e8d.6400, VLAN 25, and ports 10-12, use the following syntax:
CLI network-admin@switch > l2-static-multicast-group-create group-mac 0050.3e8d.6400 vlan 25 ports 10-12