lacp-show

This command is used to display information about Link Aggregation Control Protocol (LACP) configurations on the switch.

Syntax   lacp-show

switch switch-name

Specifies the name of the switch in the configuration.

enable|disable

Specifies if LACP is enabled or disabled.

system-priority priority

Specifies the priority for the configuration. The default value is 32768 with a range of 1 to 65535.

system-id id-string

Specifies the ID of the switch in the configuration. LACP uses the system priority with the MAC address to form the system ID and also during negotiation with other systems.

Defaults   None

Access   CLI

History   Command introduced in Version 1.2

Usage   Use this command to display information about the LACP configuration.

Examples  To display LACP information, use the following syntax

CLI network-admin@switch > lacp-show

switch:              pleiades24

enable:              yes

system-priority:     32768

systemid:800640e942c007a

switch:              pleiades32

enable:              yes

system-priority:     32768

systemid:800640e942c0143

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south