lldp-show
This command is used to display Link Layer Discovery Protocol (LLDP) information on the switch. Link Layer Discovery Protocol (LLDP) allows Ethernet network devices such as switches and routers to receive and transmit device-related information to directly connected devices on the network that are also using the protocols, and to store the information that is learned about other devices.
Syntax lldp-show
|
Specify any of the following options: |
|
|
local-port local-port-number |
Specifies the local port where the LLDP packet is received. |
|
chassis-id chassis-id-string |
Specifies the chassis ID of the switch. |
|
port-id port-id-string |
Specifies the port of the switch sending the LLDP packet. |
Defaults None
Access CLI
History Command introduced in Netvisor Version 2.0
Usage Use this command to display LLDP information on the switch.
Examples To display all LLDP information, use the following command:
CLI network-admin@switch > lldp-show
switch local-port chassis-id port-id port-desc sys-name
----------- ---------- ---------- ------- ------------------ -----------
Leaf2 41 0a0000c5 41 PN Switch Port(41) Spine1
Leaf2 42 0a0000c5 42 PN Switch Port(42) Spine1
Leaf2 63 0a0001ca 63 PN Switch Port(63) Spine2
Leaf2 64 0a0001ca 64 PN Switch Port(64) Spine2
Spine2 11 0c0000b3 11 PN Switch Port(11) Leaf1
Spine2 12 0c0000b3 12 PN Switch Port(12) Leaf1
Spine2 43 0a0000c5 43 PN Switch Port(43) Spine1
Spine2 44 0a0000c5 44 PN Switch Port(44) Spine1
Spine2 63 0a0001c8 63 PN Switch Port(63) Leaf2
Spine2 64 0a0001c8 64 PN Switch Port(64) Leaf2
Leaf1 11 0a0001ca 11 PN Switch Port(11) Spine2
Leaf1 12 0a0001ca 12 PN Switch Port(12) Spine2
Leaf1 31 0a0000c5 31 PN Switch Port(31) Spine1
Leaf1 32 0a0000c5 32 PN Switch Port(32) Spine1
Spine1 31 0c0000b3 31 PN Switch Port(31) Leaf1
Spine1 32 0c0000b3 32 PN Switch Port(32) Leaf1
Spine1 41 0a0001c8 41 PN Switch Port(41) Leaf2
Spine1 42 0a0001c8 42 PN Switch Port(42) Leaf2
Spine1 43 0a0001ca 43 PN Switch Port(43) Spine2
FSpine1 44 0a0001ca 44 PN Switch Port(44) Spine2