log-system-show
This command displays information about the log system configuration.
Syntax log-system-show
|
Specify between 0 and 2 of the following options: |
|
|
start-time date/time: yyyy-mm-ddThh:mm:ss |
Specify the start time for the log file. |
|
end-time date/time: yyyy-mm-ddThh:mm:ss |
Specify the end time for the log file. |
|
duration duration: #d#h#m#s |
Specify the duration of the log file. |
|
Specify any of the following options: |
|
|
program program-string |
Specifies the program type. |
|
pid pid-number |
Specifies the program identifiier. |
|
name name-string |
Specifies the program name. |
|
code code-number |
Specifies the code number. |
|
level critical|error|warn|note|info |
Specifies the severity level of the event. |
|
vnet vnet-name |
Specifies the VNET name. |
|
remote_switch node name |
Specifies the name of the remote switch. |
|
user user-name |
Spcifies the username. |
|
client-pid client-pid-number |
Specifies the client program identifier. |
|
client-addr ip-address |
Specifies the client IP address. |
|
port port-number |
Specifies the port number. |
|
vlan vlan-id |
Specifies the VLAN identifier. |
|
vxlan vxlan-name |
Specifies the VXLAN identifier. |
|
count number |
Displays the count from 1 to 50000. |
|
starting-point starting-point-number |
Specifies the starting point of the log audit. |
|
length length-number |
Specifies the length of the log audit. |
|
reverse| |
Specifies if the log is reverse or not reverse. |
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 6.0.0 |
The keyword, info, added to level. |
Usage Use this command to display information about the audit log.
Examples To display information about system logging, use the following command:
CLI (network-admin@pleiades25) > log-system-show format all layout vertical
category: system
time: 2014-06-16,10:33:54.425701-07:00
switch: pleiades25
program: nvOSd
pid: 1431
name: fan_initial_status
code: 11303
level: warn
message: Fan 4 initial status ok
category: system
time: 2014-06-16,10:33:54.425839-07:00
switch: pleiades25
program: nvOSd
pid: 1431
name: ps_initial_status
code: 11302
level: warn
message: Power supply 1 initial status ok
category: system
time: 2014-06-16,10:34:51.479611-07:00
switch: pleiades25
program: sh
pid: 3873
name: smf_nvOSd_stop
code: 30108
level: note
message: SMF Service stopping nvOSd
category: system
time: 2014-06-16,10:36:57.144770-07:00
switch: pleiades25
program: sh
pid: 871
name: smf_nvOSd_start
code: 30107
level: note
message: SMF Service starting nvOSd
category: system
time: 2014-06-16,10:36:58.543972-07:00
switch: pleiades25
program: nvOSd
pid: 1014
name: nvOSd_start
code: 11008
level: note
message: ===== nvOSd start: version=2.1.201005777,pn-ONVL-2.0.2-2000212193 changeset=ceb01f7ff168 branch=default
category: system
time: 2014-06-16,10:37:07.796715-07:00
switch: pleiades25
program: perl
pid: 1506
name: fanmon_fan_status
code: 30100
level: note
message: Controller 1 fan 1 speed 7050 RPM