mcast-show
This command displays multicast group information for a switch.
Syntax mcast-show
|
group-ip muticast-ip-address |
Specifies the IP address for the multicast group. |
|
vnet vnet-name |
Specifies the VNET name. |
|
l2-net l2-net-name |
Specifies the Layer 2 network name. |
Defaults Unless otherwise specified, all multicast group membership information for the local switch is displayed.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 3.0.0 |
The parameter, l2-net, added. |
Usage Hosts and adjacent switches on IPv4 networks can establish multicast group memberships.
Examples To display all multicast group memberships for the local switch, use the following command:
CLI network-admin@switch > mcast-show
group-ip vlan group-id group-ports
-------- ----- -------- -----------
239.4.10.122 1 28 43
239.4.10.70 1 27 43
239.4.10.190 1 26 17
239.4.10.222 1 25 17
239.4.10.187 1 24 17
239.4.10.32 1 23 17
239.4.10.115 1 22 17