openvswitch-modify
Open vSwitch is a multilayer virtual switch licensed by Apache 2.0. It is designed to enable massive network automation through programmable extensions. This command modifies an Open vSwitch instance on the switch.
Syntax openvswitch-modify
|
name name-string |
Specify a name for the Open vSwitch instance. |
|
Specify between 0 and 7 of the following options: |
|
|
gateway ip-address |
Specify the gateway IP address. |
|
tunnel-ip ip-address |
Specify the IP address for the tunnel. |
|
global-vtep|local-vtep |
Specify the hardware VTEP associated with Open vSwitch. |
|
cert-name cert-name-string |
Specify the certificate name for SSL connections |
|
ca-cert-name ca-cert-name-string |
Specify the CA Certificate name for SSL connections |
|
cert-location none|global|container |
Specify the Certificate location - global or within container |
|
location fabric-node name |
Specify the location of the service. |
|
storage-pool storage-pool-name |
Specify a storage pool to apply to the VNET. |
|
bfd|no-bfd |
Specify if you want to enable BFD for OVSDB created tunnels. |
Defaults None
Access CLI
History
|
Version 2.4 |
Command introduced. |
|
Version 2.4.1 |
The parameters vnet, dedicated-vnet-service|shared-vnet-service disable|enable, storage-pool, gateway db-conn-type, db-ip, db-port, db-socket deprecated. |
|
Version 2.5.4 |
The parameters, cert-name, ca-cert-name,and cert-location added. |
|
Version 3.0.0 |
The parameter, bfd, added. |
Usage Use this command to modify an Open vSwitch instance on a VNET and to accept TLS certificates.
Examples To modify an Open vSwitch instance, Open-One, on VNET, opvnet, and add the database IP address, 10.9.31.141, use the following command:
CLI network-admin@switch > openvswitch-modify name Open-One vnet opvnet db-ip 10.9.31.141