port-association-modify

This command is used to modify port associations.

Syntax   port-association-modify

name name-string

Specify a name for the port association.

Specify one or more of the following options:

master-ports port-list

Specify a list of ports to act as master ports.

slave-ports port-list

Specify a list of ports to act as slave ports.

policy all-masters|any-master

Specify a policy for the port association. The default is all-masters.

virtual-wire|no-virtual-wire

Specify if you want the associated ports to form a “virtual wire”. Once you put the switch into virtual wire mode, you disable all other features on the switch.

bidir|no-bidir

Specify if you want the port state tracking to be bi-directional or not.

monitor-ports port-list

Specify a list of ports not used by port association to monitor.

enable|no-enable

Specify if you want to enable port association in hardware.

Defaults   None

Access   CLI

History   

Version 2.2.6

Command introduced.

Version 2.4

The parameter, virtual-wire, and bidir added.

Version 2.5.2

The parameter, monitor-ports port-list, added.

Version 3.0.0

The parameter, enable, added.

Usage   Use this command to modify port associations.

Examples  To modify a port association, ports-assoc, and change the slave port list to 71-72, use the following command:

CLI network-admin@switch > port-association-modify name ports-assoc slave-ports 71-72

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south