running-config-show
This command displays information about the current configuration on the switch.
Syntax running-config-show
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.5.3 |
VNET administrator-related information displays when a VNET administrator runs this command. |
Usage Displays information about the current configuration on the switch.
Examples To display the configuration, use the following command:
CLI network-admin@switch > running-config-show
The output is lengthy and includes port information, IP addresses, VNETs, and so on.
To view VNET administrator information:
- Enable running-config for the VNET admin role, (vnet1-admin):
CLI network-admin@switch > role-modify name vnet1-admin running-config
- Log into the VNET, as vnet1-admin, and run the running-config-show command:
CLI vnet1-admin@switch > running-config-show
storage-pool-create name pool-disk2 device1 disk2
storage-pool-create name test
vnet-manager-modify name vnet1-mgr enable
vnet-manager-service-modify vnet-manager-name vnet1-mgr if eth0 web
storage-hapool-create name hapool1 local-pool pool-di hapool-peer-pool
pool-disk4 backup-interval 1m