service-heartbeat-delete
Netvisor generates a packet from the CPU to send to the receive port of an Inline Service and the Netvisor vFlow configured for snooping is not port-specific, as Netvisor accepts the response from either the receive port or the transmit port. You configure the heartbeat as an additional parameter for a specific inline service.
Syntax service-heartbeat-delete
|
name name-string |
Specify a name for the Heartbeat Service. |
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to delete a Heartbeat Service configuration.
Examples To delete Heartbeat Service, FW_probe, use the following syntax:
CLI network-admin@switch > service-heartbeat-delete name FW_probe