snmp-trap-enable-modify
This command is used to enable SNMP notifications about link conditions and common system errors.
Syntax snmp-trap-enable-modify
|
Specify one or more of the following options: |
|
|
link-up-down|no-link-up-down |
Specify if you want to send SNMP traps based on port status. |
|
interface-up-down|no-interface-up-down |
Specify if you want to send SNMP traps for vRouter interface status. |
|
default-monitors|no-default-monitors |
Specify the monitor to apply to the trap. |
|
physical-sensors|no-physical-sensors |
Specify to send traps about physical sensors. |
|
low-disk-space|no-low-disk-space |
Specify to send traps about low disk space. |
|
low-disk-space-threshold low-disk-space-threshold-string |
Specify a low disk space threshold as a percentage. |
|
system-usage|no-system-usage |
Specify to send traps about memory and CPU usage. |
|
high-system-usage-threshold high-system-usage-threshold-string |
Specify a high system usage threshold as a percentage. |
|
login-failure|no-login-failure |
Specify to send traps about login failures. |
|
cluster-tr-diverge|no-cluster-tr-diverge |
Specify to send traps when cluster transactions lists diverge. |
|
lacp-status|no-lacp-status |
Specify to send traps about LACP status. |
|
vport-modified|no-vport-modified |
Specify to send traps about vPort modifications. |
|
stp-port-modified|no-stp-port-modified |
Specify to send traps about STP port modifications. |
|
mirror-to-cpu|no-mirror-to-cpu |
Specify to send traps about mirror to CPU status. |
|
stp-port-state-failed|no-stp-port-state-failed |
Specify to send traps if the STP port status is failed. |
|
link-congestion-detected|no-link-congestion-detected |
Specify to send traps when link congestion is detected. |
|
fabric-node-state-changed|no-fabric-node-state-changed |
Specify to send traps when the fabric node state changes. |
|
stp-new-root|no-stp-new-root |
Specify to send traps when a new STP root is detected.. |
|
stp-topology-changed|no-stp-topology-changed |
Specify to send traps when STP changes are detected. |
|
vrrp-new-master|no-vrrp-new-master |
Specify to send traps when a new V RRP master is detected. |
|
disable-start-stop |
Specify if you want to disable coldstart and notifyshutdown traps. |
Defaults None
Access CLI
History
|
Version 2.0 |
Command introduced. |
|
Version 2.3 |
The parameters, physical-sensors, low-disk-space, system-usage, and login-failure, added. |
|
Version 2.4.1 |
The parameters, lacp-status, vport-modified, stp-port-modified, mirror-to-cpu, and stp-port-state-failed, added. |
|
Version 2.5 |
The parameters, link-congestion- and fabric-node-state- added. |
|
Version 2.6.2 |
The parameters, stp-new-root, stp-err-disabled, and vrrp-new master, added. |
|
Version 3.0.0 |
New parameters, disable-start-stop and interface-up-down, added. The parameter, stp-err-disable, changed to stp-topology-changed. |
|
Version 5.1.0 |
The parameter, cluster-tr-diverge|no-cluster-tr-diverge, added. |
Usage Use this command to use link status for notifications.
Examples To use link status as the notification, use the following command:
CLI network-admin@switch > snmp-trap-enable-modify link-up-down