switch-setup-modify

This command is used to modify the setup of a switch.

Syntax   switch-setup-modify

Specify one or more of the following options:

switch-name name-string

Specify the name of the switch.

mgmt-ip ip-address

Specify the IP address that allows you to connect to the management interface through the dedicated 1000/100/10 Mbps mgmt0 or mgmt1 RJ45 management ports of the switch.

mgmt-netmask netmask

Specify the netmask for the IP address.

mgmt-ip-assignment none

Specify the IP assignment type for the management interface.

mgmt-ip6 ip-address

Specify the IPv6 IP address.

mgmt-netmask-ip6 netmask

Specify the IPv6 netmask.

mgmt-ip6-assignment none

Specify the IPv6 assignment type for the management interface.

in-band-ip ip-address

Specify the IP address to connect to the management interface through the network data ports of the switch.

in-band-netmask netmask

Specify the netmask for the IP address.

in-band-ip6 ip-address

Specify an IPv6 address for the in-band interface.

in-band-netmask-ip6 netmask

Specify the netmask.

in-band-ip6-assign none|auto|conf

Specify in-band IPv6 address assignment for the in-band interface.

gateway ip-address

Specify the IP address of the gateway that connects to the outside IP network.

gateway-ip6 ip-address

Specify the IPv6 address of the gateway that connects to the outside IP network.

loopback-ip ip-address

Specify the loopback IPv4 address.

loopback-ip6 ip-address

Specify the loopback IPv6 address.

dns-ip ip-address

Specify the IP address of the primary DNS for the switch.

dns-secondary-ip ip-address

Specify the IP address of a secondary DNS for the switch.

domain-name domain-name-string

Specify the domain name for the switch.

ntp-server ntp-server-string

Specify the name or IP address of the NTP server.

ntp-secondary-server ntp-secondary-server-string

Specify the name or IP address of the secondary NTP server. You can unset a configured NTP secondary server by using an empty string ("") as parameter. You can use either single-quotes ('') or double-quotes ("") to indicate the empty string.

timezone timezone-name

Specify the timezone for the switch.

eula-accepted true|false

Specify if the EULA is accepted or not.

eula_timestamp date/time: yyyy-mm-ddThh:mm:ss

Specify the timestamp for the EULA.

password password-string

Specify a password for the switch.

date yyyy-mm-ddThh:mm:ss

Specify the date using the designated format.

analytics-store default|optimized

Specify if you want to use the default analytics store or an optimized store. If you select optimized, you must have Fusion IO cards installed for storage.

force|no-force

Force the analytics store to change even if it means removing data.

enable-host-ports|
disable-host-ports

Host ports are disabled by default.

motd motd-string 

Specify a “Message of the Day” string to display on the switch. You may enter up to 511 characters including spaces. This is a temporary or short term message to identify situations such as downtime, etc.

banner banner-string

Specify a banner to display on the switch. You may enter up to 511 characters including spaces. This is a static message that can be used to display switch information such as server identity.

enable-disk-mirror|disable-disk-mirror

Specify to enable or disable disk mirroring.

This option is available only on NRU03 and NRU-S0301 platforms.

Defaults   None.

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.1

The parameter, delete-mgmt-backup, is deprecated. The parameters, eula, and analytics store added.

Version 2.2

The parameters to support IPv6 added.

Version 2.2.3

The parameters, motd and banner, added.

Version 2.3

The parameters for LAG on the management interface added.

Version 2.4

The parameters, force and enable-host-ports, added.

Version 2.6.1

The parameter, secondary-ntp-server, added.

Version 2.6.2

The parameter, mgmt-lacp-mode, deprecated.

Version 3.0.0

IPv6 parameters added for the in-band and management interfaces.

Version 3.1.0

The parameter, phone-home, is deprecated.

Version 6.0.0

Option to unset ntp-secondary-server introduced.

Version 6.1.0

The parameters, enable-disk-mirror|disable-disk-mirror are added. This is available only on NRU03 and NRU-S0301 platforms.


Usage   Each switch must be setup when initially installed on the network. Use this command to modify the switch parameters.

Examples  To set up the switch with the name, PN-switch-1, IP address 10.9.9.71 on a /16 subnet with the gateway 10.9.9.1, DNS servers 10.9.9.11 and 10.9.9.1, the domain name pluribusnetworks.com, and NTP server, 0.uspool.ntp.org. The switch is located in the US/Pacific timezone and the administrator is network-admin. 

CLI network-admin@switch > switch-setup-modify name PN-switch-1 mgmt-ip 10.9.9.71 mgmt-netmask 16 gateway 10.9.9.1 dns 10.9.9.11 dns-secondary 10.9.9.1 domain-name pluribusnetworks.com ntp-server 0.us.pool.ntp.org username network-admin password adm1n

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south