Netvisor ONE Command Reference A-Z

optimize-arps|no-optimize-arps

Enable or disable ARP optimization. 

lldp|no-lldp

Enable or disable LLDP discovery.

policy-based-routing|no-policy-based-routing

Enable or disable policy-based routing.

optimize-nd|no-optimize-nd

Enable or disable Neighbor Discovery optimization.

reactivate-mac|no-reactivate-mac

Enable or disable reactivation of aged out MAC entries.

reactivate-vxlan-tunnel-mac|no-reactivate-vxlan-tunnel-mac

Enable or disable enable reactivation of MAC entries over VXLAN tunnels.

manage-unknown-unicast|no-manage-unknown-unicast

Enable or disable unknown unicast management.

manage-broadcast|no-manage-broadcast

Enable or disable broadcast management. 

block-loops|no-block-loops

Enable or disable loop blocking.

Note: This parameter is available only on NSU, NRU-02, NRU-03, and NRU-S0301 platforms.

auto-trunk|no-auto-trunk

Enable or disable auto trunking.

auto-host-bundle|no-auto-host-bundle

Enable or disable host auto bundling.

cluster-active-active-routing|no-cluster-active-active-routing

Enable or disable active-active cluster routing.

fast-route-download|no-fast-route-download

Enable or disable fast route download from routesnoop.

fast-interface-lookup|no-fast-interface-lookup

Enable or disable fast router interface lookup.

routing-over-vlags|no-routing-over-vlags

Enable or disable routing to VLAGs from cluster links.

optimize-datapath disable|cluster-only|all

Specify the datapath optimization for cluster, fabric

and vRouter communication:

· disable: disables datapath optimization.

· cluster-only: enables datapath optimization

for cluster-only, where cluster traffic is

redirected to cluster 4094 vNIC.

· all: enables datapath optimization for fabric

and data traffic.

The default value is all.

source-mac-miss to-cpu|copy-to-cpu

Control unknown source MAC address learn behavior.

cpu-class-enable|no-cpu-class-enable

Enable or disable CPU class.

use-igmp-snoop-l2|use-igmp-snoop-l3

Use Layer 2 or Layer 3 tables for IGMP snooping.

vle-tracking-timeout seconds

Specify VLE tracking timeout in seconds from 3 to 30 seconds.

usb-port|no-usb-port

Enable or disable the USB port on the front of the switch. This is only applicable to switches with ONVL.

pfc-buffer-limit pfc-buffer-limit-string

Percentage of global system buffer space allowed for PFC.

cosq-weight-auto|no-cosq-weight-auto

Specify if you want to adjust queue weights automatically.

lossless-mode|no-lossless-mode

Specifies lossless mode.

stagger-queries|no-stagger-queries

Specify if you want to stagger sending IGMP queries on the network.

qsfp28-port-mode none|6x40G|4x100G

configure the QSFP28 port mode as 6x40G or 4x100G.

host-refresh|no-host-refresh

Specify if you want to enable refreshing host ARP entries to keep L2 entries active.

proxy-conn-retry|no-proxy-conn-retry

Enable or disable proxy connection retry.

proxy-conn-max-retry integer

Specify the maximum number of proxy connection retry attempts from 0 to 20.

proxy-conn-retry-interval mseconds

Specify the number of milliseconds, from 100 to 2000,   to wait between proxy connection retry attempts.

nvos-debug-logging|no-nvos-debug-logging

Specify the logging mode.

manage-l2-uuc-drop|no-manage-l2-uuc-drop

Enable or disable L2 Unknown Unicast Drop towards data port.

optimize-rxlos|no-optimize-rxlos

Enable or disable processing of port modules that do not support RXLOS.

xcvr-link-debug|no-xcvr-link-debug

Enable or disable receiver link debug.

fastpath-bfd|no-fastpath-bfd

Enable or disable BFD path optimization.

linkscan-interval 10000..1000000

Specify the linkscan interval as a value between 10000μs and 1000000μs. The default value is 150000μs.

Note: This parameter is not in effect when the link scan mode is hardware.

linkscan-mode software|hardware

Specify the link scan mode as hardware or software. Software link scan mode is enabled by default.

single-pass-l2-known-multicast|no-single-pass-l2-known-multicast

Specify to enable or disable single-pass forwarding of L2 known multicast traffic.

single-pass-flood|no-single-pass-flood

Enable or disable single-pass flood.

single-pass-riot enable|disable

Specify to enable or disable the switches to perform routing in and out of tunnels (RIOT) in a single pass (that is, without requiring the loopback trunk).

Note: This option is available only on NRU03 and NRU-S03 platforms and on the Dell S4100 and S5200 Series.

cos-8-and-9-queue|no-cos-8-and-9-queue

Enable or disable CoS queues 8 and 9.

batch-move-mac-hw-group-for-vlan-only|no-batch-move-mac-hw-group-for-vlan-only

Specify to enable or disable the HW batch move for MAC by group for VLAN network only.

offline-notification-new-thread|no-offline-notification-new-thread

Enables or disables new thread to send offline notifications when switch goes down.

Version 2.5.2

Command introduced.

Version 2.5.3

The parameters, auto-host-trunk, and cluster-active-active-routing added.

Version 2.6.0

The parameters, policy-based-routing, auto-vlag-bundle, lldp, block-loops, source-mac-miss, cpu-class, igmp-snooping and usb added.

Version 3.0.0

The parameters, stagger-queries, cosq-weight-auto and vle-tracking-timeout, added.

Version 3.1.0

The parameters, host-refresh, proxy-conn-retry, proxy-conn-max-retry, proxy-conn-retry-interval, added.

Version 5.2.0

The parameter, fastpath-bfd|no-fastpath-bfd, added.

Version 6.0.0

The parameters, linkscan-mode, single-pass-flood, riot-single-pass added.

Version 6.0.1

The parameters cos-8-and-9-queue and batch-move-mac-hwgroup-for-vlan-only added.

Version 6.1.1

The parameters offline-notification-new-thread added.