system-state-show
Netvisor ONE version 6.0.1 introduces the Maintenance Mode feature in which the software prevents user traffic from entering or leaving a switch and gracefully steers the traffic to network peers. This mode is useful during hardware or software maintenance of the switch including Return Merchandise Authorization (RMA), correction of out of sync fabric transactions, cluster re-peer, switch power down or reboot, and software upgrade. This functionality is supported on cluster nodes, non-cluster spine nodes, and standalone switches. In a use case where you need to enable maintenance mode on a standalone switch, you must ensure that an alternate path exists if the switch goes down. Use this command to display system state.
Syntax system-state-show
Defaults None
Access CLI
History
|
Version 6.1.0 |
Command introduced. |
Usage Use this command to display system state.
Examples
CLI network-admin@switch > system-state-show
Maintenance mode, Ports disabled