tech-support-show
This command is used to assist Pluribus Networks Technical Assistance Center (TAC) when troubleshooting a switch.
Syntax tech-support-show
Defaults None
Access CLI
History Command introduced in Version 2.0
Usage Information in the show output provides Pluribus TAC with logs and statistics to begin the investigation on any technical issues. This command output is not comprehensive and may require additional details. While running the tech-support-show command, you should enable logging in your SSH client for capturing the output to be sent to Pluribus TAC.
Examples To display information about a switch, use the following command (the output displayed here is only a sample of the complete output):
CLI network-admin@switch > tech-support-show
==================== admin-service-show ======================
if: mgmt
ssh: on
nfs: on
web: on
web-ssl: off
web-ssl-port: 443
web-port: 80
snmp: off
net-api: on
icmp: on
if: data
ssh: on
nfs: on
web: on
web-ssl: off
web-ssl-port: 443
web-port: 80
snmp: off
net-api: on
icmp: on
==================== admin-sftp-show =========================
sftp-user: sftp
enable: yes