tunnel-stats-show
This command is used to display the tunnel statistics on the switch.
Syntax tunnel-stats-show
Use any of the following options to display tunnel statistics:
|
time date/time: yyyy-mm-ddTHH:mm:ss |
Display by date and time. |
|
start-time date/time: yyyy-mm-ddTHH:mm:s |
Display by start date and time. |
|
end-time date/time: yyyy-mm-ddTHH:mm:ss |
Display by end date and time. |
|
duration duration: #d#h#m#s |
Display by duration. |
|
interval duration: #d#h#m#s |
Display by interval. |
|
since-start |
Specify a start time for the statistics. |
|
older-than duration: #d#h#m#s |
Display statistics older than a specific date. |
|
within-last duration: #d#h#m#s |
Display statistics within a specific duration. |
|
tunnel-name tunnel-name |
Display by tunnel name. |
|
counter counter-number |
Displays the number of counters. |
|
ibytes ibytes-number |
Displays the number of incoming bytes. |
|
ibits ibits-number |
Displays the number of incoming bits. |
|
iUpkts iUpkts-number |
Displays the number of incoming Unicast packets. |
|
iBpkts iBpkts-number |
Displays the number of incoming Broadcast packets. |
|
iMpkts iMpkts-number |
Displays the number of incoming Multicast packets. |
|
iPauseFs |
Displays the number of incoming Pause frames. |
|
iCongDrops iCongDrops-number |
Displays the number of incoming packets dropped due to congestion. |
|
ierrs errs-number |
Displays the number of incoming packets with errors. |
|
obytes obytes-number |
Displays the number of outgoing bytes. |
|
obits obits-number |
Displays the number of outgoing bits. |
|
oUpkts oUpkts-number |
Displays the number of outgoing Unicast packets. |
|
oBpkts oBpkts-number |
Displays the number of outgoing Broadcast packets. |
|
oMpkts oMpkts-number |
Displays the number of outgoing Multicast packets. |
|
oPauseFs |
Displays the number of outgoing Pause frames. |
|
oCongDrops oCongDrops-number |
Displays the number of outgoing packets dropped due to congestion. |
|
oerrs oerrs-number |
Displays the number of outgoing packets with errors. |
|
mtu-errs mtu-errs-number |
Displays the number of MTU errors. |
|
HER-pkts HER-pkts-number |
Displays the number of head-end replicated packets. |
|
HER-bytes HER-bytes-number |
Displays the number of head-end replicated bytes. |
|
HER-bits HER-bits-number |
Displays the number of head-end replicated bits. |
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.2.2 |
The parameter, type, added. |
|
Version 2.2.3 |
The parameter router-if replaced name-string with vrouter-hw-if name option. |
|
Version 2.3.1 |
The parameter, active, added. |
|
Version 2.6.0 |
The parameters, HER-pkts and HER-bytes, added. |
|
Version 3.0.0 |
The following parameters added: ibits and obits. |
|
Version 6.1.0 |
The parameter HER-bits added. |
Usage Tunnels are used to encapsulate unsupported protocols on a network. Use this command to display a list of tunnels on a fabric.
Examples To display a list of all tunnels on a switch, use the following command:
CLI network-admin@switch > tunnel-stats-show