vlag-stats-clear
This command is used to clear collected statistics from a VLAG configuration.
Syntax vlag-stats-clear
|
time date/time: yyyy-mm-ddTHH:mm:ss |
Display by date and time. |
|
start-time date/time: yyyy-mm-ddTHH:mm:s |
Display by start date and time. |
|
end-time date/time: yyyy-mm-ddTHH:mm:ss |
Display by end date and time. |
|
duration duration: #d#h#m#s |
Display by duration. |
|
interval duration: #d#h#m#s |
Display by interval. |
|
since-start |
Specify a start time for the statistics. |
|
older-than duration: #d#h#m#s |
Display statistics older than a specific date. |
|
within-last duration: #d#h#m#s |
Display statistics within a specific duration. |
|
tunnel-name tunnel-name |
Display by tunnel name. |
|
counter counter-number |
Displays the number of counters. |
|
ibytes ibytes-number |
Displays the number of incoming bytes. |
|
ibits ibits-number |
Displays the number of incoming bits. |
|
iUpkts iUpkts-number |
Displays the number of incoming Unicast packets. |
|
iBpkts iBpkts-number |
Displays the number of incoming Broadcast packets. |
|
iMpkts iMpkts-number |
Displays the number of incoming Multicast packets. |
|
iPauseFs |
Displays the number of incoming Pause frames. |
|
iCongDrops iCongDrops-number |
Displays the number of incoming packets dropped due to congestion. |
|
ierrs errs-number |
Displays the number of incoming packets with errors. |
|
obytes obytes-number |
Displays the number of outgoing bytes. |
|
obits obits-number |
Displays the number of outgoing bits. |
|
oUpkts oUpkts-number |
Displays the number of outgoing Unicast packets. |
|
oBpkts oBpkts-number |
Displays the number of outgoing Broadcast packets. |
|
oMpkts oMpkts-number |
Displays the number of outgoing Multicast packets. |
|
oPauseFs |
Displays the number of outgoing Pause frames. |
|
oCongDrops oCongDrops-number |
Displays the number of outgoing packets dropped due to congestion. |
|
oerrs oerrs-number |
Displays the number of outgoing packets with errors. |
|
mtu-errs mtu-errs-number |
Displays the number of MTU errors. |
|
HER-pkts HER-pkts-number |
Displays the number of head-end replicated packets. |
|
HER-bytes HER-bytes-number |
Displays the number of head-end replicated bytes. |
Defaults None
Access Network Administrator
History Command introduced in Version 2.6.0.
Usage Use this command to clear statistics about a VLAG configuration.
Examples To clear statistics for a VLAG configuration, use the following syntax:
CLI network-admin@switch > vlag-stats-clear