vlan-port-add
This command is used to add a port to an existing VLAN.
Syntax vlan-port-add
|
vlan-id vlan-id |
Specifies the identifier of the VLAN in the range from 2 to 4092. |
|
vlan-range vlan-list |
Specify the range of VLAN IDs. |
|
vlan-vnet vnet-name |
Specify the name of the VNET assigned to the VLAN. |
|
Specify the following port arguments: |
|
|
switch switch-name |
Specify the name of the switch with the port. |
|
ports port-list |
Specifies the switch network data port number, list of ports, or range of ports. Port numbers must be in the range of 1 to 64. |
|
untagged yes|no |
Specifies if the ports tag packets with the IEEE 802.1Q VLAN header or untagged packets should automatically be mapped to the VLAN. This means that both ingress and egress packets do not contain the 802.1Q VLAN header. |
Defaults None.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.4.1 |
The parameter, vnet, added. |
|
Version 3.0.0 |
The parameter, vlan-range, added. |
Usage VLANs can be used to isolate network traffic at Layer 2. This command adds a new port to a VLAN.
Examples To add ports 17 and 18 and set them to transmit and receive untagged Ethernet packets on VLAN 7 on VNET finance-1, use the following command:
CLI network-admin@switch > vlan-port-add vlan-id 7 vlan-vnet finance-1 ports 17,18 untagged yes