vnet-manager-service-show
This command is used to display the available services on a vNET manager.
Syntax vnet-manager-service-show
|
vnet-manager-name name-string |
Specifies the name of the vNET manager. |
|
Specify the following service arguments: |
|
|
ssh|no-ssh |
Specifies if you want to use SSH or not. |
|
web|no-web |
Specifies if you want to configure Web services or not. |
|
web-ssl|no-web-ssl |
Specify if SSL is used. |
|
web-ssl-port web-ssl-port-number |
If you specify web-ssl,displays the port number. |
|
web-port web-port-number |
Specifies the port number for Web services. |
|
net-api|no-net-api |
Specify if the Netvisor APIs are enabled or disabled. |
|
icmp|no-icmp |
Specifies if you want to use Internet Control Message Protocol (ICMP) for diagnostic purposes. |
|
ntp|no-ntp |
Specify if you want to enable Network Time Protocol (NTP). |
Defaults None.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.1 |
The parameters, web-ssl, web-ssl-port, snmp, and net-api, added. |
|
Version 2.2.6 |
The parameter, ntp, added. |
|
Version 2.4 |
The parameter, net-api, added. |
Usage Use this command to display services on the vNET manager interface.
Examples To display services on all vNET managers, use the following command:
CLI network-admin@switch > vnet-manager-service-show
switch vnet-manager-name if ssh web web-ssl web-ssl-port web-port icmp
-------- ----------------- ------ --- --- ------- ------------ -------- ----
pubdev02 joedoe-mgr eth1.5 on on off 443 80 on off