vrouter-bfd-neighbor-show
Bidirectional Forwarding Detection (BFD) provides fast BFD peer failure detection times independently of all media types, encapsulations, topologies, and routing protocols BGP, EIGRP, IS-IS, and OSPF. By sending rapid failure detection notices to the routing protocols in the local router to initiate the routing table recalculation process, BFD contributes to greatly reduced overall network convergence time.
Syntax vrouter-bfd-neighbor-show
|
vrouter-name name-string |
Specifies a name for the vRouter service. |
|
Specify the following BFD arguments: |
|
|
out-addr ip-address |
Specifies the outgoing IP address. |
|
neighbor ip-address |
Specifies a neighbor IP address. |
|
local-discr local-discr-number |
Specifies the local discriminator. |
|
remote-discr remote-discr-number |
Specifies the remote discriminator. |
|
holdown holdown-number(ms) |
Specifies the detection time if the BFD session is established. |
|
multiplier multiplier-number |
Specifies a detection time multiplier. |
|
state unknown|admin-down|down|init|upno-session|not-replicator-vtep |
Specifies the state of the BFD session. |
|
interface interface-string |
Specifies the interface of the connection. |
|
flap-count flap-count-number |
Specifies the flap count on the router. |
|
remote-router remote-router-string |
Specifies the remote router name derived from the IP address. |
|
tx-int tx-int-number |
Specifies the minimum transmit interval in milliseconds. |
|
rx-int rx-int-number |
Specifies the minimum receive interval in milliseconds. |
Defaults None.
Access CLI
History
|
Version 2.2.6 |
Command introduced. |
|
Version 2.4.1 |
The parameters, flap-count and remote-router, added. |
Usage Displays information about Bidirectional Forwarding Direction neighbors.
Examples To display information about BFD, use the following command:
CLI network-admin@switch > vrouter-bfd-neighbor-show