vrouter-bgp-neighbor-shutdown
This command is used to send BGP an admin-down notification message to a BGP peer.
Syntax vrouter-bgp-neighbor-shutdown vrouter-name name-string neighbor ip-address
|
vrouter-name name-string |
Specify the name of the vRouter to reset. |
|
neighbor ip-address |
Specify the IP address of the BGP neighbor. |
|
l3-port l3-port-number |
Specify the Layer 3 port. |
Defaults None
Access CLI
History
|
Version 2.6.2 |
Command introduced. |
|
Version 5.2.0 |
The parameter, l3-port, added. |
Usage Use this command to end BGP admin-down notification message to a BGP peer.
Examples To end BGP admin-down notification message to a BGP peer with the IP address, 10.9.31.234, use the following syntax:
CLI network-admin@switch > vrouter-bgp-neighbor-shutdown vrouter bgp-2 neighbor 10.9.31.234