Netvisor ONE Command Reference A-Z

name name-string

Specify the name of the vRouter.

vnet vnet-name

Specify the name of the VNET.

router-typehardware|software

Specify if the vrouter uses hardware or software. Note that if you specify hardware as the router type, you cannot assign IP addresses using DHCP. You must specify a static IP address.

Any of the following options:

shared-vnet-mgr vnet-manager name

Specifies the VNET manager to share with if this is a shared service

disable|enable

Specify to enable or disable the vRouter service.

location fabric-node name

Specify the location of the service.

storage-pool storage-pool-name

Specify the storage pool.

router-ipstack quagga|frr

Specify the vRouter IP stack.

evpn-border|no-evpn-border

Specify to enable or disable EVPN border gateway.

evpn-dup-addr-max-moves 2..1000

Specify the maximum number of EVPN duplicate address moves. The default value is 5.

evpn-dup-addr-moves-duration 2..1800 

Specify the EVPN duplicate address move time duration. The default vale is 180s.

evpn-dup-addr-freeze none|permanent|-1..3600

EVPN duplicate address freeze duration (seconds). The default value is 180s. By default, if 5 MAC moves are detected in a 180s time window, the duplicate MAC address entry is frozen for 180s.

cluster-active-active-routing|no-cluster-active-active-routing   

Specify active-active routing with or without VRRP.

hw-vrrp-id hw-vrrp-id-number

Specifies the VRRP ID for a hardware router.

bgp-as bgp-as-number

Specify the Autonomous System Number (ASN) if the vRouter runs Border Gateway Protocol (BGP).

router-id ip-address

Specify the vRouter IP address

proto-multi none|pim-ssm

Specify the optional multicast protocol for the vRouter service. Select none, Vector Multicast Routing Protocol (VMRP), or Protocol Independent Multicast-source specific mode (PIM-SIM).

bgp-redistribute static|connected|rip|ospf

Specify how BGP routes are redistributed.

bgp-redist-static-metric none

Specify a static metric for BGP route redistribution. This is a number between 0 and 4294967295 or specify none to unset.

bgp-redist-connected-metric none

Specify a connected metric for BGP route redistribution. This is a number between 0 and 4294967295 or specify none to unset.

bgp-redist-rip-metric none

Specify a RIP metric for BGP route redistribution. This is a number between 0 and 4294967295 or specify none to unset.

bgp-redist-ospf-metric none

Specify a OSPF metric for BGP route redistribution. This is a number between 0 and 4294967295 or specify none to unset.

bgp-cluster-id ip-address

Specify an IP address for a BGP cluster.

bgp-max-paths bgp-max-paths-number

Specify the maximum number of paths for BGP. This is a number between 1 and 255 or 0 to unset.

bgp-ibgp-multipath bgp-ibgp-multipath-number

Specify the number of multipaths for BGP. This is a number between 1 and 255 or 0 to unset.

bgp-bestpath-as-path none|ignore

Specify a parameter for a best path as path.

bgp-dampening|no-bgp-dampening

Specify dampening for BGP routes.

bgp-delayed-startup 0..36000

Specify if you want to delay forming peer adjacency during bootup. BGP neighbors are not brought up until the timer's expiry. You can specify a value from the range 0 to 36000 seconds. 

The default value is 0.

bgp-network-import-check|no-bgp-network-import-check

Specifies whether BGP network route exists in IGP.

bgp-update-delay-strict 0..3600

Specify if you want to to put BGP read-only mode during bootup. BGP neighbors are brought up and receives the peer routes but local routes are not advertised until the timer's expiry. You can specify a value from the range 0 to 3600 seconds. 

The default value is 0.

Note: Configuring a non-default value is recommended for L3 spines having more than 10 L3 interfaces.

bgp-keepalive-interval seconds

Specify a BGP keepalive interval in seconds. The default is 60 seconds with a range of 0 to 65535 seconds.

bgp-holdtime seconds

Specify a BGP holdtime in seconds. The default is 180 seconds with a range of 0 to 65535 seconds.

bgp-distance-external integer

Specify the BGP distance for routes external to the AS.

bgp-distance-internal integer

Specify the BGP distance for routes internal to the AS.

bgp-distance-local integer

Specify the BGP distance for routes local to the AS.

bgp-ipv4-unicast|no-bgp-ipv4-unicast

Specify a MP-BGP Control default IPv4 Unicast AFI/SAFI.

rip-redistribute static|connected|ospf|bgp

Specify how RIP routes are redistributed.

vrrp-track-port port-list

Specify a port to track a VRRP configuration.

ospf-redistribute static|connected|rip|bgp

Specify how OSPF routes are redistributed.

ospf-redist-static-metric-type 1|2

Specify a static metric type for OSPF route redistribution. This is a number between 0 and 16777214 or 'none' to unset.

ospf-redist-connected-metric none

Specify a connected metric for OSPF route redistribution.

ospf-redist-connected-metric-type 1|2

Specify a connected metric type for OSPF route redistribution.

ospf-stub-router-on-startup|no-ospf-stub-router-on-startup

Specify if you want advertise self as stub router temporary on startup.

ospf-stub-router-on-startup-period integer

Specify the time period to advertise self as stub router on startup. This s a value between 5 and 86400 seconds.

ospf-redist-rip-metric none

Specify a RIP metric type for OSPF route redistribution. This is a number between 0 and 16777214 or 'none' to unset.

ospf-redist-rip-metric-type 1|2

Specify a RIP metric type for OSPF route redistribution.

ospf-redist-bgp-metric none

Specify a BGP metric type for OSPF route redistribution. This is a number between 0 and 16777214 or 'none' to unset.

ospf-redist-bgp-metric-type 1|2

Specify a BGP metric type for OSPF route redistribution.

ospf6-redistribute static|connected|bgp4

Specify if you want to redistribute OSPF6 routes.

ospf-distance-external integer

Specify the OSPF distance for routes external to the AS.

ospf-distance-internal integer

Specify the OSPF distance for routes internal to the AS.

ospf-distance-local integer

Specify the OSPF distance for routes local to the AS.

ospf-stub-router-on-startup|no-ospf-stub-router-on-startup

Specify if you want the OSPF router to act as a stub router at startup.

ospf-stub-router-on-startup-period seconds

Specify the time period for the OSPF stub router in seconds. You can configure from 5 to 86400 seconds.

ospf-bfd-all-if|no-ospf-bfd-all-if

Specify if you want to use BFD protocol for fault detection on all OSPF interfaces.

ospf-default-information none|originate|always

Specify if you want to control origination of default route.

ospf-default-info-originate-metric none

Specify the metric for OSPF origination of default route.

ospf-default-info-originate-metric-type 1|2

Specify the metric type for OSPF origination of default route.

ospf6-redist-static-metric none

Specify a metric for OSPF6 redistribute of static routes.

ospf6-redist-static-metric-type 1|2

Specify a metric type for OSPF6 redistribution of static routes.

ospf6-redist-connected-metric none

Specify a metric for OSPF6 redistribution of connected routes.

ospf6-redist-connected-metric-type 1|2

Specify a metric type for OSPF6 redistribution.

ospf-default-information none|originate|always

Specify how to control the origination of default route.

ospf-default-info-originate-metric none

Specify the metric for OSPF origination of default route.

ospf-default-info-originate-metric-type 1|2

Specify the metric type for OSPF origination of default route.

ospf-default-info-originate-route-map vrouter route-map name   

Specify the route map for OSPF origination of default route.

vrrp-track-port port-listS

Specify the ports for VRRP tracking.

bgp-snmp|no-bgp-snmp

Enable or disable BGP SNMP MIB.

bgp-snmp-notification|no-bgp-snmp-notification

Enable or disable SNMP notifications for BGP MIBs.

ospf-snmp|no-ospf-snmp

Enable or disable OSPF SNMP MIB.

ospf-snmp-notification|no-ospf-snmp-notification

Enable or disable SNMP notifications for OSPF MIBs.

ospf6-snmp|no-ospf6-snmp

Enable or disable OSPFv3 SNMP MIB.

ospf6-snmp-notification|no-bgp-snmp-notification

Enable or disable SNMP notifications for OSPFv3 MIBs.

ip-snmp|no-ip-snmp

Enable or disable ipForward SNMP MIBs.

no-bgp-redist-static-route-map

Remove route map for BGP static redistribution.

no-bgp-redist-connected-route-map

Remove route map for BGP connected redistribution.

no-bgp-redist-ospf-route-map

Remove route map for BGP OSPF redistribution.

bgp-graceful-shutdown|no-bgp-graceful-shutdown

Specify BGP graceful shutdown according to RFE 8326.

Version 1.2

Command introduced.

Version 2.0

Parameter router-type added.

Version 2.2

The parameter, hw-vrrp-id, added. The parameters, bgp-redistribute, rip-redistribute, and ospf-redistribute, added.

Version 2.2.3

The parameters bgp-redist and ospf-dist added. The parameter vrrp-track-port added. The parameters bgp-cluster, bgp-max-paths, bgp-multipath, bgp-best-path, bgp-dampening, bgp-graceful-restart, and bgp-stalepath-time added.

Version 2.3.1

The parameters, ospf6-, added.

Version 2.4

The parameters, ospf-stub-router-on-startup and vrrp-track-port added. The parameters bgp-scantime, bgp-keepalive-interval, and bgp-holdtime added.

Version 2.4.1

The parameter, bgp-distance-, and ospf-distance, added.

Version 2.5.4

The parameter, shared-vnet-mgr, added.

Version 2.6.0

SNMP MIBs for BGP, OSPF, OSPFv3, and ipForward added.

Version 3.0.0

The parameters, ospf-bfd-all-if, ospf-default-information, ospf-default-info-originate, and ospf-default-info-originate-metric-type added.

Version 3.1.0

The parameters for route maps added.

Version 5.1.1

The parameter bgp-graceful-shutdown|no-bgp-graceful-shutdown is added.

Version 5.1.1

The parameter bgp-graceful-restart|no-bgp-graceful-restart is removed.

Version 6.1.0

The parameter evpn-border|no-evpn-border added.

Version 6.1.1

The parameters evpn-dup-addr-max-moves, evpn-dup-addr-moves-duration, bgp-update-delay-strict and evpn-dup-addr-freeze added.