vrouter-loopback-interface-add

This command adds a loopback address to a virtual router (vRouter) service for a fabric, cluster, virtual network (VNET), or standalone switch. The maximum number of loopback interfaces is 255. Netvisor supports IPv4 and IPv6 addresses.

Syntax   vrouter-loopback-interface-add

vrouter-name name-string

Specify the name of the vRouter.

Specify the following loopback interface arguments:

index number 

Specify the interface index from 1 to 255.

ip-address

Specify the network IP address.

Defaults   None.

Access   CLI

History   Command introduced in Version 2.2.

Usage   Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command adds a loopback address for an existing vRouter service.

Examples  To add the loopback interface of 192.168.11.13 to vRouter, MyvService, , use the following command:

CLI network-admin@switch > vrouter-loopback-interface-add vrouter-name MyvService index 1 ip-address 192.168.11.13


 

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south