vrouter-mrib-routes-show
This command is used to display multicast routes in Routing Information Base (RIB).
Syntax vrouter-mrib-routes-show
|
type <*,G>|<*,G,V> |
Displays the RIB route type. |
|
srcip ip-address |
Displays the source IP address. |
|
group ip-address |
Displays the group IP address. |
|
vlan 0..4095 |
Displays the VLAN ID. |
|
vrid vrid-number |
Displays the virtual router ID. |
|
hw-group-id hw-group-id-number |
Displays the hardware group ID. |
|
vnic vnic-string |
Displays the VNIC name. |
|
vnic-vlan vnic-vlan-number |
Displays the VLAN assigned to the VNIC. |
|
ports port-list |
Displays the port list. |
|
flags in-hw |
Displays the hardware flags for the route. |
Defaults None
Access CLI
History
Usage Use this command to display information about multicast routes in the Routing Information Base (RIB).
Examples To display multicast routes in the RIB, use the following syntax:
CLI network-admin@switch > vrouter-mrib-routes-show