vrouter-multicast-route-show
This command displays the multicast forwarding state for one more multicast routers or one or more multicast groups.
Syntax vrouter-multicast-route-show
|
vrouter-name name-string |
Displays the vRouter name. |
|
source ip-address |
Displays the source IP address. |
|
group ip-address |
Displays the group IP address. |
|
parent parent-number |
Displays the parent number. |
|
oif_bitmap oif_bitmap-number |
Displays the bitmap of virtual interfaces to forward packets. |
|
incoming-if if-string |
Displays the name of the incoming interface. |
|
outgoing-if if-string |
Displays the name of the outgoing interface. |
Defaults None
Access CLI
History Command introduced in Version 2.2.5.
Usage Use this command to display information about muticast routes.
Examples To display multicast route information use the following syntax:
CLI network-admin@switch > vrouter-multicast-route-show
vrouter-name source group incoming-if outgoing-ifs
------------ ------------- --------- ----------- ------------
vr0 10.16.110.100 224.1.1.1 eth0.110 eth0.112
vr1 10.16.110.100 224.1.1.1 eth1.112 eth0.114
vr2 10.16.110.100 224.1.1.1 eth1.114 eth0.115