vrouter-ospf-neighbor-show
This command is used to display OSPF neighbors for a vRouter configured for OSPF.
Syntax vrouter-ospf-neighbor-show
|
vrouter-name name-string |
Specifies the name of the vRouter. |
|
neighbor ip-address |
Specifies the IP address of the OSPF neighbor |
|
pri pri-number |
Specifies the priority. |
|
state state-string |
Specifies the current state of the OSPF neighbor. |
|
dead-time dead-time |
Specifies the dead-time. Dead-time is the interval of time that the vRouter waits before declaring a neighbor is down. |
|
address ip-address |
Specifies the IP address of the vRouter. |
|
interface interface-string |
Specifies the interface on the vRouter. |
|
vlan vlan-id |
Specifies the VLAN ID. |
|
l3-port l3-port-number |
Specifies the Layer 3 port number. |
Defaults None.
Access CLI
History Command introduced in nvOS Version 1.2.1.
Usage Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays OSPF information for an existing Router service.
Examples To display information about all OSPF neighbors on the network, use the following command:
CLI network-admin@switch > vrouter-ospf-neighbor-show layout vertical