vrouter-ospf6-neighbor-show
This command is used to display OSPF6 neighbors for a vRouter configured for OSPF6.
Syntax vrouter-ospf6-neighbor-show
|
vrouter-name name-string |
Specifies the name of the vRouter. |
|
neighbor-rid ip-address |
Specifies the IP address of the OSPF neighbor |
|
pri pri-number |
Specifies the priority. |
|
state state-string |
Specifies the current state of the OSPF neighbor. |
|
dead-time dead-time |
Specifies the dead-time. Dead-time is the interval of time that the vRouter waits before declaring a neighbor is down. |
|
duration duration-string |
Specifies the duration in hh:mm:ss. |
|
interface interface-string |
Specifies the interface on the vRouter. |
Defaults None.
Access CLI
History Command introduced in Version 2.3.1.
Usage Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays OSPF6 information for an existing Router service.
Examples To display information about all OSPF6 neighbors on the network, use the following command:
CLI network-admin@switch > vrouter-ospf6-neighbor-show layout vertical