vrouter-packet-relay-show
This command is used to display information about DHCP packet relay configuration.
Syntax vrouter-packet-relay-show vrouter-name name-string forward-proto dhcp forward-ip ip-address nic vrouter interface nic
|
vrouter-name name-string |
Specify the name of the vRouter. |
|
Specify the following packet relay arguments: |
|
|
forward-proto dhcp |
Specify the forwarding protocol. |
|
forward-ip ip-address |
Specify the IP address to forward packets. |
|
nic vrouter interface nic |
Specify the interface of the vRouter. |
|
vrf vrouter vrf|default |
Specify the name of the VRF. |
Defaults None
Access CLI
History Command introduced in version 2.2.3.
Usage Use this command to view DHCP packet relay configuration.
Examples To view the DHCP packet relay configuration, use the following command:
CLI (network-admin@switch) > vrouter-packet-relay-show
vrouter-name forward-proto forward-ip nic vrf
------------ ------------- ------------ -------- ----
vr1 dhcp 192.168.1.10 eth2.102 vrf1
vr1 dhcp 192.168.2.10 eth2.102 vrf1