vrouter-prefix-list-modify
Prefix lists are used by BGP and OSPF to filter route advertisements.
Syntax vrouter-prefix-list-modify
|
vrouter-name name-string |
Specify the name of the vRouter. |
|
Specify the following prefix-list arguments: |
|
|
name name-string |
Specify a name for the prefix list. |
|
action permit|deny |
Specify the type of action, permit or deny. |
|
prefix ip-address |
Specify the IP address used as the prefix. |
|
netmask netmask |
Specify the netmask of the IP address. |
|
Specify any of the following options: |
|
|
seq number |
Specify a sequence number. This is a number between 1 and 4294967295. |
|
min-prefix-len number |
Specify the minimum prefix length. This is a value between 0 and 32. |
|
max-prefix-len number |
Specify the maximum prefix length. This is a value between 0 and 32. |
Defaults None
Access CLI
History
|
Version 2.2.3 |
Command introduced. |
|
Version 2.2.4 |
The parameter, any, added. |
|
Version 2.5 |
The parameter, anyv6, added. |
|
Version 5.1.0 |
The parameters, any and anyv6, deprecated. |
Usage Use this command to modify prefix lists used with BGP and OSPF.
Examples To modify a prefix list, no-ads, and change the action to permit, use the following syntax:
CLI network-admin@switch > vrouter-prefix-list-modify vrouter-name vrouter-ospf name no-ads action permit