vrouter-rip-show
This command displays RIP information on vRouter services on a fabric, cluster, virtual network (VNET), or standalone switch.
Syntax vrouter-rip-show
|
vrouter-name name-string |
Specifies the name of the vRouter service. |
|
network ip-address |
Specifies the IP address. |
|
netmask netmask |
Specifies the netmask of the IP address. |
|
next-hop ip-address |
Specifies the next hop IP address |
Defaults None.
Access CLI.
History
|
Version 1.2 |
Command added. |
|
Version 2.1 |
The parameter, metric, added.. |
Usage Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks and implements Layer 3 protocols. This command displays information about RIP instances on existing vRouter services.
Examples To display RIP information on all vRouter services, use the following command:
CLI network-admin@switch > vrouter-rip-show layout vertical