vrouter-routes-stats-show
This command is used to display statistical information about all routes on one or all configured vRouters.
Syntax vrouter-routes-stats-show vrouter-name name-string
|
vrouter-name name-string |
Specifies the name of a vRouter. |
|
fib-max-routes fib-max-routes-number |
Specifies the maximum number of routes in the Forwarding Information Database. |
|
fib-current-routes fib-current-routes-number |
Specifies the number of current routes in the Forwarding Information Database. |
|
rib-current-routes rib-current-routes-number |
Specifies the number of current routes in the Routing Information Database |
Defaults None
Access CLI
History Command introduced in Version 2.3.3.
Usage Use this command to identify routes on vRouters configured on the switch.
Examples To display all route information for all vRouters, use the following command:
CLI network-admin@switch > vrouter-routes-stats-show
vrouter-name network type interface
------------ ------------- --------- ---------------
vr-ext-50 10.121.1.0/24 connected ext.50.mgr.eth0
vr-ext-50 10.111.1.0/24 rip ext.50.mgr.eth0
vr-ext-50 127.0.0.0/8 connected lo0
vr-www-51 10.121.1.0/24 connected www.51.mgr.eth1
vr-www-51 10.111.1.0/24 connected www.51.mgr.eth0
vr-www-51 127.0.0.0/8 connected lo0