vtep-auto-vlan-modify
You use this command to automatically assign VLANs to a VTEP.
Syntax vtep-auto-vlan-modify
|
vlans 0..4095 |
Specify the starting VLAN ID. |
|
vlan-end 0..4095 |
Specify the ending VLAN ID. |
Defaults None
Access Network Administrator
History Command introduced in Version 3.1.0.
Usage Use the command to automatically assign VLANs to VTEP.
Examples To automatically assign VLANs 10 to 20 to VTEPs, use the following syntax:
CLI network-admin@switch > vtep-auto-vlan-modify vlans 10 vlan-end 20