Post Installation Configuration



After installation and activation is complete you can proceed to configure the switches for your network.


The Pluribus Data Center Interconnect Validated Design Guide provides a practical guide to create validated leaf-spine architectures.


The Pluribus Networks Netvisor ONE Configuration Guide provides an authoritative guide to the many features of Netvisor ONE. Basic knowledge of the management CLI is assumed; use the Configuration Guide to review CLI syntax and structure.


The overall procedure to configure Netvisor ONE based on the Validated Design Guide is as follows:


1)Review the topology and design considerations


oRedundancy requirements

oIP and VLAN scheme


2)Completing the initial switch setup


oSetup wizard runs automatically upon first login (default login/password: pluribus/admin)

oSet the timezone

oOther management interface parameters may need to be configured

oReview NTP server information to be used for time sync


3)Creating the ONVL Fabric


ofabric-create command or fabric-join command

ofabric-show command


For more details on configuring the Netvisor ONE features, see the Configuration Guide.


north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south