fabric-local-modify
This command is used to modify a local fabric on the network.
Syntax fabric-local-modify
|
vlan vlan-id |
Specify the VLAN to modify on the local fabric. |
|
change-password change-passwor-string |
Use this option to change the fabric password after confirming the current password. |
|
reset-password reset-password-string |
Use this option to reset the fabric password forcefully. Note: Resetting the password requires assistance from Pluribus support. |
|
control-network in-band|mgmt |
Specify the in-band interface or the management interface to send fabric communications over the control plane. |
|
fabric-network in-band|mgmt |
Specify the in-band interface or the management interface for fabric administrative network. |
|
fabric-advertisement-network inband-mgmt|inband-vmgmt|inband-only|mgmt-only |
Specify if you want to send fabric advertisement packets over the inband management interface or inband only. |
Defaults The default VLAN for a fabric is VLAN 0.
Access CLI
History .
|
Version 2.2 |
Command introduced. |
|
Version 2.2.4 |
The parameter, network-type, introduced. |
|
Version 2.4 |
The parameter, network-type, removed. Two parameters, fabric-network and control-network added. The parameter, repeer-to-cluster-node, added. |
|
Version 2.4.1 |
The parameter, fabric-advertisement-network, added. |
|
Version 6.0.0 |
The parameters, change-password and reset-password, introduced. |
Usage In some network configurations, you may want to assign a different VLAN to a local fabric.
Examples To modify a local fabric and assign it to VLAN 2, use the following syntax:
CLI (network-admin@switch) > fabric-local-modify vlan 2