fabric-vnic-show

Netvisor allows the creation of a management interface on a Virtual Network Interface Card (vNIC) for fabric communication. In the current fabric, Netvisor allows two subnets: one for out-of-band provisioning and fabric, and one for in-band fabric. This feature allows three subnets per fabric:

    • An out-of-band provisioning subnet
    • An out-of-band fabric subnet
    • An in-band fabric subnet

Each subnets uses a separate VLAN for traffic isolation purposes. When a vNIC is created for the management interface, fabric communication automatically switches to this vNIC, without additional configuration.

Syntax   fabric-vnic-show

ip ip-address

Displays the IP address of the vNIC.

netmask netmask

Displays the netmask for the IP address.

vlan vlan-id

Displays the VLAN ID for the vNIC. This must be unique to the vNIC.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to display information about a fabric management vNIC.

Examples  To display information about a fabric management vNI, use the following syntax:

CLI (network-admin@switch) > fabric-vnic-show

nic:        vmgmt0

ip:         20.1.1.1/24

mac:        66:0e:94:6a:2a:ad

vlan:       20

nic-config: enable

nic-state:  up

 

From the output, you can see the status of the interface as enabled and up as well as the vNIC name, IP address, MAC address, and VLAN.

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south