igmp-static-source-show

This command displays a static IGMP source on the network.

Informational Note:  IGMPv1 is not supported in nvOS. If you are using IGMPv1, you must disable IGMP snooping on the Pluribus Networks switch.


Syntax   igmp-static-source-show

group-ip ip-address

Specifies the group IP address for IGMP.

vnet vnet-name

Specify the name of the vNET assigned to the IGMP static source.

source-ip ip-address

Specifies the source IP address.

bd bridge-domain name

Specifies the bridge domain name.

vlan vlan-id

Specifies the VLAN identifier.

ports port-list

Specifies the list of ports.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.4.1

The parameter, vnet, added.

Version 5.1.1

The parameter, host, deprecated, and the parameter, bd, added.

Usage   IGMP groups are used to determine the reception state for a specific multicast address. This allows the switch to determine if any switches need messages sent from a multicast group. Use this command to remove an IGMP static source.

Examples  To display information about all IGMP static source IP addresses, use the following command:

CLI (network-admin@switch) > igmp-static-source-show

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south