inline-service-show

The Inline Service feature manages service chains for Layer 1 Virtual Wire switches. The term, Inline Services, refers to services attached to a Layer 1 Virtual Wire switch such as Next-Generation Firewall (NGFW), Intrusion Detection System (IDS), Intrusion Prevention System (IPS), and Distributed Denial of Service attack (DDoS) Prevention.

When an Inline Service fails, a policy determines if traffic is allowed to bypass the Inline Services or if the traffic is blocked until the Inline Services recovers.

This command displays information about an inline service configuration.

Syntax   inline-service-show

name name-string

Displays a name for the Inline Service.

tx-port port-list

Displays the ports to send the Inline Service.

rx-port port-list

Displays the ports to receive the Inline Service.

status down|up

Displays the status of the inline service.

heartbeat service-heartbeat name | none

Specify the service heartbeat.

Defaults   None

Access   Network Administrator

History   

Version 2.6.0

Command introduced.

Version 3.0.0

The parameter, heartbeat service-heartbeat, added.

Usage   Use this command to display information about an Inline Service configuration.

Examples  To display an Inline Service configuration, use the following syntax:

CLI (network-admin@switch) > inline-service-show

switch name tx-port rx-port     

------ ---- ------- -------

Leaf1  IDS   1      2              

Leaf1  FW    10     20

Leaf1  FW    40     40

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south