ip-pool-show

This command displays information about an IP address pool with a specific IP address range.

Syntax   ip-pool-show

name ip-pool-name

Specifies the name of the IP pool.

vnet vnet-name

Specifies the vNET for the IP pool.

scope local|fabric

Specifies the scope of the vNET.

start-ip ip-address

Specifies the first IP address in the pool. This address is included in the pool.

end-ip ip-address

Specifies the end IP address of the pool and is included in the pool.

network ip-address

Specify an IP address group such as 192.168.11.0.

netmask netmask

Specifies the subnet for the IP address pool.

l2-net l2-net-name

Specify the name of the Layer 2 network.

vlan vlan-id

Specifies the VLAN identifier for an IP address pool that applies to a specific Layer 2 network segment.

bd bridge-domain name

Specify the Bridge Domain assigned to IP pool.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.2

The parameter, vnet, deprecated.

Version 3.0.0

The parameter, l2-net, added.

Version 5.1.1

The parameter l2-net deprecated and the parameter bd added.

Usage   IP address pools help automate the management of IP addresses for hosts and virtual machines, including the management IP addresses of the switches in a fabric.

Examples  To display information about a fabric-wide IP address pool named vPool, use the following command:

CLI (network-admin@switch) > ip-pool-show name vPool

Name  Owner Scope Range Start   Range End       Nemask Gateway   DNS

----- ----- ----- ------------- --------------- ------ --------- ---

vPool  None local 192.168.240.1 192.168.240.254 24     10.9.40.1  0

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south