l2-check-fix


It is possible for Layer 2 entries to go out of sync between what is present in the hardware and in software. This command checks the status of Layer 2 entries, logs the errors, and fixes them when possible.

Syntax   l2-check-fix

mac mac-address

Specifies the virtual router ID from 0 to 15.

vnet vnet-name

Specifies the IP address of the entry.

bd bridge-domain-name

Specifies the bridge domain.

vlan vlan-id

Specifies the VLAN ID.

public-vlan vlan-id

Specify the public VLAN assigned to the vPort.

vxlan vxlan-id

Specify if you want to check and fix out of synch VXLANs IDs of vPorts.

sw-port port-number

Specify the software port.

sw-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag| peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete

Specify the software state to check.

hw-port port-number

Specify the port number of the hardware.

tunnel-name tunnel-name-string

Specify the tunnel name.

hw-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag| peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete

Specify the hardware state to check and fix.

fix-action none|add-to-hardware|removefrom-hardware|fix-port-in-hardware|fix-tunnel-in-hardware|FAILED-add-to-hardware|FAILED-remove-from-hardware|FAILED-fix-port-in-hardware|FAILED-fix-tunnel-in-hardware|delete-port-mac|mark-port-mac

Specifies the action used to fix the entry.

Defaults   None

Access   CLI

History   

Version 2.4

Command introduced.

Version 2.4.1

The option, igmp-mac, user-flush, vxlan-loopback,router added to parameters sw-state and hw-state. The options, delete-port-mac and mark-port-mac added to the parameter fix-action. The parameter, public-vlan, also added.

Version 2.6.2

Additional parameters added to sw-state and hw-state.

Version 3.0.0

The parameter, l2-net, added.

Version 5.1.1

The options, invalid-vlan|owner-lost|cluster-link-down|vxlan-router, added to the parameters, sw-state, and hw-state.

Usage   Use this command to verify and fix Layer 2 entries that are out of sync in the Layer 2 table.

Examples  Use the following syntax to fix out of sync Layer 2 table entries.

CLI (network-admin@switch) > l2-check-fix vlan 25

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south