l3-table-show

Glossary		Print Page		Document Feedback		Support & Services		Pluribus Networks		Pluribus Blog		LinkedIn		Facebook		Twitter

l3-table-show

This command allows you to display the Layer 3 table settings.

Syntax l3-table-show

Specify one or more of the following options:
mac mac-address	Displays the MAC address.
ip ip-address	Displays the IP address.
vnet vnet-name	Displays the name of the vNET.
bd bridge-domain name	Displays the bridge domain.
vlan 0..4095	Displays the VLAN ID.
public-vlan 0..4095	Specify the public VLAN assigned to the vPort
vxlan 0..16777215	Displays the assigned VXLAN.
intf intf-number	Displays the interface.
rt-if rt-if-string	Displays the router interface.
hw-intf hw-intf-number	Displayss the interface programmed in hardware.
state active\|static\|vrrp\|tunnel\|software\|needs-peer-status\|port-mac\|hit\|ageout-check\|moving\|loop-probe\|local-tunnel\|igmp-mac\|user-flush\|vxlan-loopback\|router\|update-peer-only\|active-state-mismatch\|peer-port-missing\|peer-port-not-vlag\|peer-port-not-orphaned\|peer-port-not-cluster-link\|sw-active\|anycast\|hsrp\|invalid-vlan\|owner-lost\|cluster-link-down\|vxlan-router\|peer-force-resync\|excess-mac-move-detected\|excess-ip-move-detected\|retry\|evpn\|evpn-wo-bgp\|evpn-def-gw\|evpn-delete	Displays the flags.
owner-state active\|static\|vrrp\|tunnel\|software\|needs-peer-status\|port-mac\|hit\|ageout-check\|moving\|loop-probe\|local-tunnel\|igmp-mac\|user-flush\|vxlan-loopback\|router\|update-peer-only\|active-state-mismatch\|peer-port-missing\|peer-port-not-vlag\|peer-port-not-orphaned\|peer-port-not-cluster-link\|sw-active\|anycast\|hsrp\|invalid-vlan\|owner-lost\|cluster-link-down\|vxlan-router\|peer-force-resync\|excess-mac-move-detected\|excess-ip-move-detected\|retry\|evpn\|evpn-wo-bgp\|evpn-def-gw\|evpn-delete	Displays the owner-state flags.
peer-state active\|static\|vrrp\|tunnel\|software\|needs-peer-status\|port-mac\| hit\|ageout-check\|moving\|loop-probe\|local-tunnel\|igmp-mac\|user-flush\|vxlan-loopback\|router\|update-peer-only\|active-state-mismatch\|peer-port-missing\|peer-port-not-vlag\|peer-port-not-orphaned\|peer-port-not-cluster-link\|sw-active\| hsrp	Displays the peer-state flags.
egress-id egress-id-number	Displays the hardware egress ID.
create-time date/time: yyyy-mm-ddThh:mm:ss	Displays the time entry created.
last-seen date/time: yyyy-mm-ddThh:mm:ss	Displays the last time seen on network.
hit hit-number	Displays the number of hits.
tunnel tunnel-string	Displays the tunnel name.

Defaults None

Access CLI

History

Version 2.4	Command introduced.
Version 2.4.1	The parameters, public-vlan, owner-state, peer-state and tunnel added. The options, user-flush\|vxlan-loopback\|router added to state, owner-state, and peer-state.
Version 2.6.2	The parameters, hw-intf and egress-id added. The options update-peer-only\|active-state-mismatch\| peer-port-missing\|peer-port-not-vlag\|peer-port-not-orphaned\|peer-port-not-cluster-link\|sw-active\|hsrp added to state, owner-state, peer-state.
Version 3.0.0	The parameter, l2-net, added.

Usage Use this command to show the Layer 3 table setting.

Examples To display the Layer 3 table setting, use the following command:

CLI (network-admin@switch) > l3-table-show format all

switch:	spine1-1
mac:	c6:8f:66:55:fe:30
ip:	192.168.1.3
vlan:	1
vxlan:	0
intf:	128
rt-if:
state:	active
create-time:	10-06,15:58:02
last-seen:	09:06:44
hit:	1764

There is no routing interface (rt-if) value because there are no Layer 3 routes configured on the switch.