lacp-show
This command is used to display information about Link Aggregation Control Protocol (LACP) configurations on the switch.
Syntax lacp-show
|
switch switch-name |
Specifies the name of the switch in the configuration. |
|
enable|disable |
Specifies if LACP is enabled or disabled. |
|
system-priority priority |
Specifies the priority for the configuration. The default value is 32768 with a range of 1 to 65535. |
|
system-id id-string |
Specifies the ID of the switch in the configuration. LACP uses the system priority with the MAC address to form the system ID and also during negotiation with other systems. |
Defaults None
Access CLI
History Command introduced in Version 1.2
Usage Use this command to display information about the LACP configuration.
Examples To display LACP information, use the following syntax
CLI (network-admin@switch) > lacp-show
switch: pleiades24
enable: yes
system-priority: 32768
systemid: 800640e942c007a
switch: pleiades32
enable: yes
system-priority: 32768
systemid: 800640e942c0143