log-audit-show

This command displays information about the log audit configuration.

Syntax   log-audit-show

Specify between 0 and 2 of the following options:

start-time date/time: yyyy-mm-ddThh:mm:ss

Specifies the start time for the audit log.

end-time date/time: yyyy-mm-ddThh:mm:ss

Specifies the end time for the audit log.

duration duration: #d#h#m#s

Specifies the duration of the audit log.

Specify any of the following options:

program program-string

Specifies the program type.

pid pid-number

Specifies the product indentifiier.

name name-string

Specifies the name to match.

code code-number

Specifies the code number.

level critical|error|warn|note|info

Specifies the severity level.

vnet vnet-name

Specifies the name of the virtual network.

remote_switch node name

Specifies the name of the remote switch.

user user-name

Spcifies the username.

client-pid client-pid-number

Specifies the client program identifier.

client-addr ip-address

Specifies the client IP address.

port port-number

Specifies the port number.

vlan vlan-id

Specifies the VLAN identifier.

vxlan vxlan-id

Specifies the VXLAN identifier.

count number

Displays the count between 1 and 50000.

starting-point starting-point-number

Specifies the starting point of the log audit.

length length-number

Specifies the length of the log audit.

reverse|no-reverse

Specifies if the log is displayed in reverse or not.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.2

The parameters, starting-point, length and reverse added.

Version 2.2.5

The IP address is logged as part of a user login event.

Version 6.0.0

The keyword, info, added to the parameter level.

Usage   Use this command to display information about the audit log.

Examples  To display information about log audits, use the following command:

CLI (network-admin@switch1) > log-audit-show layout vertical

category:       audit

time:           2015-04-22,07:59:08.947601-07:00

switch:         switch1

program:        nvOSd

pid:            1242

name:           xact_command

code:           11101

level:          info

remote_switch:  switch2

user:           network-admin

client-addr:    10.9.10.24

message:        Transaction command "vlan-create id 25 scope fabric stats" result success

starting-point: 8324

length:         1628813

category:       audit

time:           2015-04-22,08:08:32.577538-07:00

switch:         switch1

program:        nvOSd

pid:            1242

name:           user_command

code:           11001

level:          info

user:           network-admin

client-pid:     5446

client-addr:    10.9.10.24

message:        Command "vlan-port-add vlan-id 25 ports 55 untagged" result success

starting-point: 8324

length:         1629091

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south