mcast-show
This command displays multicast group information for a switch.
Syntax mcast-show
|
group-ip muticast-ip-address |
Specifies the IP address for the multicast group. |
|
vnet vnet-name |
Specifies the vNET name. |
|
l2-net l2-net-name |
Specifies the Layer 2 network name. |
Defaults Unless otherwise specified, all multicast group membership information for the local switch is displayed.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 3.0.0 |
The parameter, l2-net, added. |
Usage Hosts and adjacent switches on IPv4 networks can establish multicast group memberships.
Examples To display all multicast group memberships for the local switch, use the following command:
CLI (network-admin@switch) > mcast-show
switch group-ip vnet bd vlan group-id group-ports
------ --------- ---- ---- ----- -------- -----------
switch 239.4.9.3 1 33554434 0,61,65
switch 239.4.9.7 1 33554436 61,65,69
switch 239.4.9.4 1 33554435 61,65,69