port-buffer-show
You can display the buffer utilization, percentage and size, for ports on a switch.
Syntax port-buffer-show
|
time date/time: yyyy-mm-ddThh:mm:ss |
Specify a time to display port buffering. |
|
start-time date/time: yyyy-mm-ddThh:mm:ss |
Specify a start time to display port buffering. |
|
end-time date/time: yyyy-mm-ddThh:mm:ss |
Specify an end time to display port buffering. |
|
duration duration: #d#h#m#s |
Specify a duration to display port buffering. |
|
interval duration: #d#h#m#s |
Specify an interval to display port buffering. |
|
since-start |
Specify a start time to display port buffering. |
|
older-than duration: #d#h#m#s |
Specify an older-than time period to display port buffering. |
|
within-last duration: #d#h#m#s |
Specify a within last time period to display port buffering. |
|
port port-list |
Specify a port list. |
Defaults None
Access CLI
History Command introduced in Version 2.2.1.
Usage In some cases, you may want to buffer packets leaving and entering the ports on the switch.
Examples To display the buffer information, use following command:
CLI (network-admin@switch) > port-buffer-show format all layout vertical
switch: Pleiades24
port: 65
ingress-used-buf: 0%
ingress-used-buf-val: 0
egress-used-buf: 0%
egress-used-buf-val: 0
switch: Pleiades24
port: 66
ingress-used-buf: 0%
ingress-used-buf-val: 0
egress-used-buf: 0%
egress-used-buf-val: 0
switch: Pleiades24
port: 69
ingress-used-buf: 0%
ingress-used-buf-val: 0
egress-used-buf: 0%
egress-used-buf-val: 0
switch: Pleiades24
port: 70
ingress-used-buf: 0%
ingress-used-buf-val: 0
egress-used-buf: 0%
egress-used-buf-val: 0
switch: Pleiades24
port: 71
ingress-used-buf: 0%
ingress-used-buf-val: 0
egress-used-buf: 0%
egress-used-buf-val: 0
switch: Pleiades24
port: 72
ingress-used-buf: 0%
ingress-used-buf-val: 0
egress-used-buf: 0%
egress-used-buf-val: 0