service-heartbeat-modify

Netvisor generates a packet from the CPU to send to the receive port of an Inline Service and the Netvisor vFlow configured for snooping is not port-specific, as Netvisor accepts the response from either the receive port or the transmit port. You configure the heartbeat as an additional parameter for a specific Inline Service.

Syntax   service-heartbeat-modify

name name-string

Specify a name for the Heartbeat Service.

interval duration: #d#h#m#s

Specify the interval between heartbeat packets.

retry retry-number

Specify the number of times to retry sending a packet.

payload payload-string

Specify the payload for the heartbeat packet.

Defaults   None

Access   Network Administrator

History   Command introduced in Version 2.6.0.

Usage   Use this command to modify a Heartbeat Service configuration.

Examples  To modify a Heartbeat Service, use the following syntax:

CLI (network-admin@switch) > service-heartbeat-modify name FW_probe retry 5

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south